Display, General View; Avigating Through The Menus - Optimus COMPACT Installation And Operating Instructions Manual

7. DISPLAY, GENERAL VIEW

In standby, the unit displays the following information:
Name: Name, identifier of the unit in the installation
Version: Version of the unit firmware
Date: System date and time
4 tabs identified by icons are displayed on the top line:
EMERGENCY
This menu allows viewing the units as well as the zones that are
in emergency mode. The following information is displayed by
the tab:
SYSTEM ALARMS
Enables to display the alarms in the system, showing the unit generating the alarm and the type of alarm.
SELECTION OF ZONES
Allows viewing the zones status, modify the zones volume, and if the unit has an ME-200B module, select zones to
make an announcement using the front microphone (ME-200B).
SETTINGS
Allows modifying certain parameters of the unit (IP address, Netmask...), change user, check status of the unit or
monitor channels.

8. AVIGATING THROUGH THE MENUS

Using the navigation buttons you can access the different menus of the COMPACT.
Basic navigation through the menus:
- Move between tabs
(previous tab)
- Return to the top level menu
COMPACT version 5.2.002 ENG
COMPACT
4ETH
- Move between options in a menu
(previous item)
-
- Move between options in a menu
(next item)
Number of zones
in emergency mode
Number of zones in Emergency Mode
that are making announcements
- Enter the selected menu
- Confirm a data entry
- Confirm a chosen option
Move between tabs (next tab)
R + D Department
Modular audio matrix
with IP connection
Total number of zones
in the installation
Total number of zones in
the installation
17