Optimus COMPACT Installation And Operating Instructions Manual page 11

2) Remove the control module.
Figure 13
3) Insert the battery respecting the
polarity indicated in the drawing in
figure 14.
4) Once placed, insert the control
module and turn on the COMPACT
power.
When inserting or changing the battery, it is necessary to synchronize the time of the equipment with the rest of the equipment
in the installation. To do this:
•
If
one or more NTP servers are configured in the system, the time and date of the equipment will be updated automatically.
•
If there is a server PC in the system, you can update the time using the Call Point software.
•
are neither NTP servers nor server PCs in the system, connect to the web server of the unit to change
If there
the date and time:
a PC whose IP address is in range with that of the unit, open a browser, enter the IP address of
1. From
the unit and press ENTER.
Enter
2. the
In the Setup section, select Time.
3.
Modify the date and time parameters and click Set Time.
4.
COMPACT version 5.2.002 ENG
COMPACT
4ETH
Figure 14
By default, the unit's network settings are as follows:
IP ADDRESS: 10.1.1.1
NETMASK: 255.0.0.0.0
GATETEWAY: 0.0.0.0.0 (no Gateway)
username optimax, the password 1933 and click the Login button.
Modular audio matrix
with IP connection
R + D Department
11