L&W SC-600 ES Operating Instructions Manual page 29

F I R S T C O M M I S S I O N I N G
Check oil level
Warning
!
Check oil level daily. Never start the compressor with a too low oil level. Risk of accidental
loss, destruction or deterioration.
Check oil before each operation of the system!
The oil level should be between the middle and upper end of
the oil sight glass. Never start the compressor with a too low
oil level.
Refill new compressor oil at least when the oil level reached
the middle of the indicated area.
Check V-Belt Tension
The V-belts could lose tension during transportation.
Check the V-belt tension before starting the compressor.
Tension V-Belt / Correct V-Belt Tension
See chapter "Service and Maintenance" -> "Tension V-belts"
LW SC-600 ES / LW SC-680 ES / LW SC-750 ES
Version: 01.01.2023
Oil sight glass
A
Page A - 27