L&W SC-600 ES Operating Instructions Manual page 146

ANNEX SCOPE OF TESTING; TEST CRITERIA
Recommended scope of testing "Functional
test" (before initial or recommissioning)
Note:
Visual inspection must be carried out before the functional test
 All parts of the system must be tested at least at the maximum working pressure that could be
achieved taking into account all intended applications:
- Are the hose lines and connecting elements free of leakage?
- Have all hose lines withstood the pressure?
Note:
The installed hose lines should not be made from used hoses or used press fittings which
have already been in use as part of a hose assembly!
Information on the service life of
L&W high pressure hoses
Version: 2020-06-01
Page - 11