Installation And Connection; Scope Of Supply; Installing And Connecting The Appliance; Drainage Connection - Siemens SC76M542EU Information For Use

en Installation and connection

Installation and connection

5 Installation and con-
nection
To ensure proper operation, connect
Installation and connection
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
5.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
Dishwasher
¡
User manual
¡
Installation Instructions
¡
1
Warranty
¡
Installation material
¡
Steam guard plate
¡
Rubber apron
¡
Mains cable
¡
Quick reference guide
¡
5.2 Installing and connecting
the appliance
You can position your appliance in a
fitted kitchen between wooden and
plastic walls.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection. → Page 13
1
Depending on the appliance specifications
12
1
1
1
Check the Scope of supply
3.
→ Page 12 and the condition of
the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Set the appliance up so it is level.
5.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 12
Install the drinking water connec-
7.
tion. → Page 13
Connect the appliance to the
8.
power supply.
5.3 Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover
4.
in the drainage system preventing
the wastewater from being dis-
charged.