GE AMX-II Service Manual page 46

GENERAL ELECTRIC MEDICAL SYSTEMS AMX-il X-RAY UNIT
7-1576 SM A0654E
SEC.5 CONNECTING CABLES
5-1 Stator Cable
1. Route the stator cable over the top of the transformer and to the left end of the 8TS1. See Illustration
— 3-10.
ν
a ος
1870410
ILLUSTRATION 3-10
3. Route the stator cable to the 3TB1 panel as shown in Illustration 3-11.
a
CAUTION: Route stator cable
at least 2 inches (50.8 mm) away
from 1R4 and 1R7. They become
hot and may damage the cable.
23571-P10
ILLUSTRATION 3-11
4. Cut the wires as required and instal! soiderless push-on terminals.
312