Table of Contents
Advertisement
1
6 Troubleshoot problems
K You can fix minor problems with your device yourself. Use that
Troubleshooting information before contacting customer service. This way you
avoid unnecessary costs.
WARNING
Danger of electric shock!
Improper repairs are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used to repair the device.
▶
If the power cord of this device is damaged, it must be replaced by the
▶
manufacturer or its customer service or a similarly qualified person to avoid
hazards.
Disturbance
"Hot" and drum
rotates.
humming
noise.
The display has gone
out andStart/pause
ze / Départ/Pause
flashes.
Device works
not.
Device paused, but
the drum rotates
itself.
Cause and troubleshooting
Cooling process active.
No mistake.
1.
Do not change the program during the cooling
2.
process.
A notice:The cooling process takes up to 10 minutes.
You can continue to operate the device.
Compressor active.
No error - normal operating noise.
▶
Energy saving mode is active.
Press any key. aThe display lights
▶
up again.
Lint filter is dirty.
→
"Cleaning the lint filter", page 31
▶
The mains plug of the mains connection cable is not plugged
in.
Connect the device to the power supply.
▶
The fuse in the fuse box has tripped.
Check the fuse in the fuse box.
▶
Power supply has failed.
Check whether the room lights or other devices in
▶
the room are working.
Cooling process active.
No error - no action necessary.
▶
Troubleshootingde
39
Advertisement
Table of Contents
