Siemens WT43N203FG Manual page 14

deSetting up and connecting
water drain hose to drain excess
condensation water directly into the
wastewater.
Hints
¡Operate this device with
the included water drain hose.
→ "Connecting the water drain
hose", page 14
If you connect the water drain hose,
you do not have to regularly empty
the condensation water container.
→
"Empty the condensation water
container", page 32
¡You can do this optional
→
"Accessories", page 28 order from
customer service.
Water drain hose
connect
If you do not want to empty the
device's condensation container
regularly, connect the water drain
hose.
DANGER!
If the device is operated without a
properly connected condensation
water hose or water drain hose, liquid
may escape from the nozzle.
Before operating the device,
▶
properly connect the condensation
water hose or the water drain hose
to the connector.
requirements
¡The device and accessories are
unpacked.
→
"Unpacking the device", page 12
¡The device is installed at the installation location
provides.
→
"Requirements for the installation
location", page 13
14
Pull the condensation water hose from
1.
the connector.
The condensation water hose is
connected to the nozzle at the
factory.
A notice:When removing the
condensation hose, liquid may
escape from the connector.
Slide the condensation water hose
2.
onto the holder.