Siemens WT43N203FG Manual page 15

Push the water drain hose onto
3.
the connector as far as it will
go.
Insert the water drain hose into the
4.
hose guide.
Make sure not to kink the water
drain hose.
Connect the device to the water
5.
drain.
→
"Water drain connection types",
page 15
Tip:To collect the condensation water
again in the condensation water
container, e.g. If you change the
location of the device, for example,
undo these steps in reverse order.
Setting up and connectingde
Water drain connection types
DANGER!
If the drain is clogged or blocked,
backed-up wastewater can flow back
into the device.
Before operating the device, ensure
▶
that wastewater drains quickly and
clear any blockages.
process into one
Siphon.
expiration in one
Bathroom sink.
The connection
place with one
Hose clamp
(12-22 mm)
chern.
The water drain
running hose with
a hose
leadership in mini
times 80 cm and
maximum 100 cm
Fix height.
A notice:With
the Y distributor
→ Page 28 can-
name that one
water drain
hose one
additional equipment
advices such as B. a
washing machine
machine at the same time
chen process of the
siphons on
close.
The water drain
running hose
completely through
the manifold
→ page 12 push
and with that
fastening
fix material.
The manifold in
maximum 100 cm
Fix height.
15