Energy Saving Mode; Setting Up And Connecting; Unpacking The Device; Scope Of Delivery - Siemens WT43N203FG Manual

deSetting up and connecting
After drying, clean the lint filter →
Page 31 .
aA contaminated lint filter at least
alters the air flow in the device,
extends the program duration and
increases energy consumption.
Clean the floor unit regularly → Page
36 .
aA contaminated heat exchanger
extends the program duration and
increases energy consumption.

3.3 Energy saving mode

If you do not use the device for a long
time, it automatically switches to
energy saving mode. All displays go
out andStart/Pauze/Départ/Break
flashes. The energy saving mode is
ended by operating the device again.
4 Set up and
Connect
4.1 Unpack the device
DANGER!
Objects left in the drum that are not
intended to operate in the device can
cause property damage and damage
to the device.
Remove these items and included
▶
accessories from the drum before
operation.
Completely remove packaging material
1.
and protective covers from the device.
nen.
→ "Dispose of packaging",
Page 11
12
Check the device for visible damage.
2.
Open the door.
3.
Remove the accessories from the
4.
drum.
Close the door.
5.

4.2 Scope of delivery

After unpacking, check all parts for
transport damage and that the
delivery is complete.
DANGER!
Operation with incomplete or
defective accessories can impair the
device function or lead to property
damage and device damage.
Do not operate the device with
▶
incomplete or defective
accessories.
Replace relevant accessories before
▶
operating the device.
→
"Accessories", page 28
scope of delivery
Description
Tumble dryer
Supporting documents
water drain
hose with connection
terminal adapter,
fastening
material and curved
mer.
→ "water drain
hose",
Page 13