Advertisement
1. Scope
This document specifies the steps to insert or remove the DF60 series.
It contains general guidelines and precautions for the safe use of the product.
The use of the product in a way not as specified in the document could result in unexpected
troubles such as damage to connectors.
Please make sure to thoroughly read and understand the document prior to the use of the
product.
2. Connectors
1
Part No.
DF60#-*P-10.16DS(A)
DF60#-*EP-10.16C
DF60#-*S-10.16C
DF60#-*S-10.16C-CV
DF60#-****SC(F)A
DF60-****PC(F)A
DF60-3S-10.16C
+ DF60-####SC(F)A
DF60-3P-10.16DSA
COUNT
DESCRIPTION OF REVISIONS
△
1
6
名 称
TITLE
DF60 Series Mating/Unmating Operation Instruction Manual
技 術 指 定 書
FORM HC0011-9-1
Description
In-line Plug
Covercase
Crimp contact for socket
Crimp contact for In-line plug
DF60-3P-10.16DS
Fig. 1. DF60 connector
DIS-H-00019386
TECHNICAL SPECIFICATION
Header
Socket
DF60FS-3S-10.16C
+ DF60FS-3S-10.16C-CV
+ DF60S-####SC(F)A
DESIGNED
SN.MIWA
APPROVED
CHECKED
DESIGNED
WRITTEN
DF60-3EP-10.16C
+ DF60-####PC(F)A
CHECKED
TT.OHSAKO
HIROSE ELECTRIC CO.,LTD.
SJ.OKAMURA
SZ.ONO
TS.MIYAKI
TS.MIYAKI
ETAD-H0654-00
DATE
20231101
20210728
20210728
20210728
20210728
1 / 6
△
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hirose DF60 Series
Summary of Contents for Hirose DF60 Series
- Page 1 1. Scope This document specifies the steps to insert or remove the DF60 series. It contains general guidelines and precautions for the safe use of the product. The use of the product in a way not as specified in the document could result in unexpected troubles such as damage to connectors.
- Page 2 Then, it is not needed to handle the lock portion (If it is inserted the socket by pushing the lock portion, it does not hear click sound.) Right angle type Straight type Push in the center Fig. 3. Insertion △ HIROSE ELECTRIC CO.,LTD. 2 / 6 ETAD-H0654-00 FORM HC0011-9-2...
- Page 3 Fig. 4. Forbidden insertion (1) Attention 2. Avoid insert socket by bundling the cable or applying stress to the socket like below picture shown. Fig. 5. Forbidden insertion (2) △ HIROSE ELECTRIC CO.,LTD. 3 / 6 ETAD-H0654-00 FORM HC0011-9-2...
- Page 4 Attention. If you remove the lock while it is caught, you will not be able to remove it properly. Gently grab the cable Push the lock Fig. 7. Socket removal △ HIROSE ELECTRIC CO.,LTD. 4 / 6 ETAD-H0654-00 FORM HC0011-9-2...
- Page 5 4. Precautions ・Do not insert or remove the socket while electrifying. ・Do not pull the lock as shown below. The lock may be damaged. Fig. 8. Prohibited uses (Unmating state) △ HIROSE ELECTRIC CO.,LTD. 5 / 6 ETAD-H0654-00 FORM HC0011-9-2...
- Page 6 Please be careful not to route the cable in a way that puts a load on the base of the cable, as shown in the diagram below. Do not bent from the root Fig. 9. Prohibited uses (Mating state) △ HIROSE ELECTRIC CO.,LTD. 6 / 6 ETAD-H0654-00 FORM HC0011-9-2...
Need help?
Do you have a question about the DF60 Series and is the answer not in the manual?
Questions and answers