Advertisement
Quick Links
IN-LINE WIRE HARNESS
INSTRUCTION MANUAL
COUNT
DESCRIPTION OF REVISIONS
△
2
1
TITLE
GT16GM SERIES IN-LINE WIRE HARNESS INSTRUCTION MANUAL
TECHNICAL SPECIFICATION
FORM HC0011-9-1
GT16GM SERIES
DIS-T-00002589
DESIGNED
AM.YAMAUCHI
HIROSE ELECTRIC CO.,LTD.
APPROVED
CHECKED
DESIGNED
WRITTEN
ETAD-T0652-00
CHECKED
DATE
KT.MAKI
17.10.25
KI.HIROKAWA
17.05.24
MO.OKADA
17.05.24
MING.JIANG
17.05.23
MING.JIANG
17.05.23
△
1 / 6
1
Advertisement
Related Manuals for Hirose GT16GM Series
Summary of Contents for Hirose GT16GM Series
- Page 1 IN-LINE WIRE HARNESS INSTRUCTION MANUAL COUNT DESCRIPTION OF REVISIONS DESIGNED CHECKED DATE △ DIS-T-00002589 AM.YAMAUCHI KT.MAKI 17.10.25 TITLE HIROSE ELECTRIC CO.,LTD. GT16GM SERIES IN-LINE WIRE HARNESS INSTRUCTION MANUAL APPROVED KI.HIROKAWA 17.05.24 CHECKED MO.OKADA 17.05.24 DESIGNED MING.JIANG 17.05.23 WRITTEN MING.JIANG 17.05.23 △...
- Page 2 HRS No. GT16G-PC CL766-0047-3 Outer contact Model HRS No. GT16G-/1.6-2.9PC CL766-0048-6 Outer ferrule Model HRS No. GT16G-1.5DHQS(L) CL766-0111-0 Contact ferrule Model HRS No. GT16G-FR CL766-0028-9 Housing Model HRS No. GT16GM-1P-HU CL766-0050-8 GT16GMN-1PP-HU CL766-0051-0 △ HIROSE ELECTRIC CO.,LTD. ETAD-T0652-00 FORM HC0011-9-2...
- Page 3 Put the cable into the outer contact. Note: 1. Check that the direction of the outer contact is correct as shown in the illustration below. Note: 2. Pay attention not to deform the crimped contact. △ HIROSE ELECTRIC CO.,LTD. ETAD-T0652-00 FORM HC0011-9-2...
- Page 4 Check that the direction of the contact ferrule is correct as shown in the illustration below. Coincide the slit of contact ferrule with the protruding part of the center contact and insert the contact ferrule. Note: 2. Pay attention not to deform the crimped contact. △ HIROSE ELECTRIC CO.,LTD. ETAD-T0652-00 FORM HC0011-9-2...
- Page 5 (i.e., the slit of the outer ferrule coincide in position with the barrel bottom of the outer contact). Note: 2. Insert the cable until the insulator is stopped by the groove end face of the outer contact. △ HIROSE ELECTRIC CO.,LTD. ETAD-T0652-00 FORM HC0011-9-2...
- Page 6 Note: 1. Coincide the protruding part of the outer contact with the groove of the housing and insert the outer contact. Note: 2. Insert the outer contact until the position of the outer contact is fixed by the lance of the housing. (10) Harness work completed △ HIROSE ELECTRIC CO.,LTD. ETAD-T0652-00 FORM HC0011-9-2...
Need help?
Do you have a question about the GT16GM Series and is the answer not in the manual?
Questions and answers