Balboa CLIM8ZONE II User And Service Manual page 11

5. Controller Panel Operation
5.1 Controller Panel Display:
5.2 Button Descriptions:
No Key
1
2
3
4
5 Red LED On
6 Green LED On
7 Red LED flashing
8 Red & Green LED Off
5.3 Operation Instructions:
1. Turn ON/OFF
Press the button for 2 seconds.
2. Mode conversion
Press button to switch heat / cooling mode; Heating =Red LED On ; Cooling = Green LED On.
3. Change temperature unit Fahrenheit/Celsius
Long press three buttons
4. Forced defrosting
When the outer coil pipe temperature is below the Exit Defrosting Temperature, press two buttons
3 seconds to enter the Forced Defrosting.
5. Change Set Temperatures:
Set temperatures can be adjusted by pressing Up
6. Status Query
To enter the unit status query, press
Turn ON/OFF the controller panel
Increase the setting values.
Decrease the setting values.
Change modes.
Heating mode
Cooling mode
Defrosting mode
Heat pump OFF
+ + at the same time to switch the display of Fahrenheit and Celsius.
button
for 3 seconds to view the temperature parameters. See table
Description
or Down buttons.
+ for
11