Balboa Clim8zone Installation Manual
  1. Manuals
  2. Brands
  3. Balboa Manuals
  4. Heat Pump
  5. Clim8zone
  6. Installation manual

Balboa Clim8zone Installation Manual

Hide thumbs Also See for Clim8zone:
Table of Contents

Advertisement

Quick Links

Installation Guide
Your Single Source Solution

Advertisement

Table of Contents
loading

Related Manuals for Balboa Clim8zone

Summary of Contents for Balboa Clim8zone

  • Page 1 Installation Guide Your Single Source Solution...

  • Page 2: Table Of Contents

    NORTH AMERICA UK, EUROPE, AUSTRALIA, NEW ZEALAND AND REST OF THE WORLD PLUMBING SPA EQUIPMENT DIAGRAM WATER FLOW PUMP UNION CONDENSATION DRAIN Please visit us at www.BalboaWaterGroup.com Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...
  • Page 3 WARNING WARNING ■ If you power Off the CLIM8ZONE WARNING ■ Do not use means to accelerate the unit, please empty the water in heat ■ Make sure the switch is turned...
  • Page 4 17.0” 406.4 mm 16.0” 444.0 mm 17.5” 430.0 mm xxxxx 474.0 mm 18.7” 432.3 mm 17.0” 474.0 mm 794. 1 mm 18.7” 31.3” Figure 1 Figure 2 Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...

  • Page 5: Please Visit Us At Www.balboawatergroup.com

    CLIM8ZONE is compatible with the following spa controls. Follow the minimum clearance requirements shown below during installation and operation of the CLIM8ZONE unit. These clearances insure proper air flow. All air vents must be unobstructed and free of debris. BP CONTROL SYSTEMS...

  • Page 6: Mounting

    Foot Pad Follow the minimum clearance requirements (figure 3) to insure proper air flow. 2 - Each foot (figure 4, A) on the CLIM8ZONE unit has a mounting hole. Clearly mark the center of each mounting hole on the concrete slab. Move the CLIM8ZONE unit to make room for step 3.

  • Page 7: Platform

    1 - Establish the location of the CLIM8ZONE unit on the platform (figure 5, A). Each foot on the CLIM8ZONE unit has a mounting hole (figure 5, A). Clearly mark the center of each mounting hole on the platform (figure 5, A).

  • Page 8: Electrical Connections

    Connect the grounding lug with the spa common bonding grid with a #8 minimum solid copper wire. 7 - Power On the BP Control System at the GFCI or circuit breaker. Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...

  • Page 9: Europe, Australia, New Zealand

    5 - Reinstall the lid of the BP Control System (figure 7, B). 5.71 A 6 - Power On the BP Control System at the RCD or circuit breaker. Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...
  • Page 10 Connect to CLIM8ZONE (figure 8, B). BP Control System (B) power cable (D1) 6 - Power On the BP Control System at the RCD or circuit breaker. Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...

  • Page 11: Spa Equipment Diagram

    Flow Control Valve or Ball Valve Water Flow Direction Slice Valve (optional) Control Panel Ozone / UV BP Control System Spa Water Main Power Heating Pump Slice Valve Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...

  • Page 12: Water Flow

    0.81 2.0" Water flow rate for the BP Control System: During a Low/No Flow condition, the CLIM8ZONE unit will not heat or cool the water and will display an Minimum: 23 GPM (5.22 m3/H) error message on the control panel display.
  • Page 13 A heat pump can both heat or cool spa water, and all of the heating and cooling equipment is contained in BALL VALVE Flow Control Valve or Ball Valve the heat pump. CLIM8ZONE (figure 11, A) is a Control Panel heat pump. BP Control System 2.0"...

  • Page 14: Pump Union 1

    (figure 12, E) and Gasket 2 (figure 12, F) are mounted properly on Pump Union 1 (figure 10, B). Install Pump Union 1 into the water outlet as shown here. Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...

  • Page 15: Condensation Drain

    Make sure the end of the hose has proper drainage, so water does not collect around the CLIM8ZONE unit. Condensation is normal and is not a water leak. Balboa Water Group | Your Single Source Solution INSTALLATION GUIDE 42391 Rev A...
  • Page 16 M - F 7:00AM to 6:00PM PT Costa Mesa, CA 92626 MEXICO OPERATIONS EUROPEAN OPERATIONS Balboa Water Group Balboa Water Group Aguila Azteca 6011 Hydroair International Baja Maq. El Aquila ApS Roustvej 50 DK-6800 Mexico 22221 Varde Balboa Water Group | Your Single Source Solution...

Table of Contents