Advertisement
snuoyy
pue suoyeopuy
ueeieg
sepuymern
+ seideuo
lll III
The SetupNavi function records the setup menu and
setup files onto a tape, so that the same settings can be
called up and used again or copied to another camera.
The SetupLog function records a camera settings every
few seconds at shooting and displays the recorded data
in the viewfinder during playback.
When an RM-M7G is connected to the camera head,
you cannot use the SetupNavi function.
To make it possible to use the function, power OFF the
camera head after disconnecting the RM-M7G, then
power ON the camera head again.
The procedure to replace camera's menu settings with
settings recorded onto video tape is described here.
1 Connect the DSR-1/1P and insert the cassette onto
which the data was recorded.
Set the SETUP
switch to FILE, then set the POWER switch to ON
while holding down the UP/ON button.
Advanced menu page | appears.
9PAGE
1(NEXT9¥
PREV3A)
ALL RESET
CYES9A)
EXIT
MENU
(YES?A)
2 Repeatedly press down on the MENU/STATUS
switch until advanced menu 14 appears.
For details of menu operation, see "Advanced Menu
Operations" (page 64).
2PAGE14 (NEXT9¥
PREVA)
SETUP
NAVI —
TAPE®CAMERA
RECALL
DATA
(YES2A)
EXIT
MENU
CYES?A)
76
Chapter 4
Viewfinder Screen indications and Menus
"NO TAPE" is displayed if you neglected to load a
cassette.
3 > Press the UP/ON button to call up the data
recorded on the tape. (Press the DOWN/OFF
button to cancel).
The display changes as follows and the call up
operation begins.
PAGE
14 (NEXT9¥
PREV3A)
SETUP
NAVI
TAPESCAMERA
CANCEL
TO RECALL?
(YESSY)
SETUP
NAVI
(MY FILE
EXIT
MENU
(YES3A)
Name of data
being called up
To abort the call up operation while in progress
Press the DOWN/OFF button.
The following display appears.
PAGE
14 (NEXT9¥
PREVA)
SETUP
NAVI
TAPE®CAMERA
SURE
TO RECALL?
(YES3A)
EXIT
MENU
(YES
A)
4 Press the UP/ON button.
After the data has been read, the following display
appears.
PAGE
14 (NEXT9¥ PREVA)
SETUP
NAVI
TAPESCAMERA
>DONE
EXIT
MENU
(YES3é)
The previous menu settings are overwritten by the
data recorded on the tape.
5 Change the menu settings if necessary.
Advertisement
