Advertisement
snuoyy
pue suoneorpuy
vosiog
sopuywern
y serdeuo
|IllllTIIIlIil
Setup Files
3 Access advanced menu page 13.
PAGE 13 (NEXT9¥
PREV3A)
FILE STORE
FILE <XFILMLIKE
DEST INATIO
L
USER!
STORE FILE?
(YES3a)
Currently
selected file ®
EXIT
MENU
(YES3A)
a) An asterisk (*) appears in front of any factory
preset file whose contents have been revised
at least once.
4 Move the cursor to DESTINATION FILE and
repeatedly press the UP/ON button or the DOWN/
OFF button to select USER1, USER2, or USER3.
PAGE 13(NEXT?¥ PREVA)
FILE
STORE
FILE: *xFILMLIKE
DESTINATION
FILE
STORE
FILE?
(YES9 A)
File in which
current settings
are to be stored
EXIT
MENU
(YES3A)
5 Press the UP/ON button to move the cursor to
STORE FILE?.
The display changes as shown below.
PAGE13 (NEXT9¥ PREVA)
FILE
STORE
FILE: *FILMLIKE
DESTINATION
FILE
USER2
STORE
FILE?
CYES3A)
EXIT
MENU
(YES3A)
. 6 Press the UP/ON button to store the file. To abort
the save operation, press the DOWN/OFF button
(the display returns to the one shown at step 4).
When the save operation is finished, the display
changes as shown below.
74
Chapter 4
Viewfinder Screen Indications and Menus
PAGE13(NEXT9¥ PREVA)
FILE STORE
FILE: XFILMLIKE
DESTINATION FILE
USER2
STORE
FILE?
DONE
EXIT
MENU
(YES?A)
To save setup files to a tape (when using
the DSR-1/1P)
Connect the DSR-1/1P to the camera head and load the
tape onto which the file will be recorded.
1 Perform steps 1 to 4 of "Saving File Settings" and
select TAPE as the file saving destination.
|
=
.__. _.
a=
tl
PAGE
13 (NEXT9¥
PREVA)
FILE
STORE
FILE: XFILMLIKE
DESTINATION
FILE
TAPE
STORE
FILE?
(YES 3A)
EXIT
MENU
(YES?A)-
2 Press the UP/ON button to move the cursor to
STORE FILE?.
The display changes as shown below.
PAGE 13 (NEXT9¥ PREVU9A)
FILE
STORE
FILE: XFILMLIKE
DESTINATION
FILE
TAPE
READY
TAPE?
(YES3A)
EXIT
MENU
(YES3A)
Advertisement
