Advertisement
Stowing the camera
_Align the camera with the base of the case, and slide
Align the camera with the base of the
the camera in forward.
carrying case.
Checking that the pin at the rear engages correctly,
'push forward until it locks into place.
* Bring the viewfinder into the horizontal position,
slide it fully rearward and to the left, then fix before
stowing.
* When an optional microphone (ECM-670/672, C-74,
etc.) is attached, loosen the microphone fixing
screws, move the microphone to the lowest position,
and fix before stowing.
.
ll
suoyoeuuog
pue
Bug
gse}deyo
Example of fully-stowed carrying case
DXC-D35/D35P/D35WS/D35WSP Color
Video Camera
This can be stored with the following system
component fitted.
* CA-537/537P/327/327P/325A/325AP/325B
Camera Adaptor or DSR-1/1P, PVV-3/3P. or
EVV-9000/9000P
:
* DXF-801/801CE Viewfinder
SS
bese earying
* ECM-670/ECM-672/C-74 Microphone
* Zoom lens (VCL-918BYetc.)
(Largest lens which can be stowed is
Canon J18 X 8.5BI-B.)
¢ CAC-12 Microphone Holder
* CAC-4 Chest Pad
VCT-U14 Tripod Adaptor
Fasten straps.
NP-1A/1B Battery Packs
(maximum two) - Fasten straps.
Casseties, camera cables, etc.
Chapter 2 Fitting and Connections
35
Advertisement
