Advertisement
VTR selector settings on the CA-537/537P
Connected VTR
Sony broadcast and
' | professional VTRs:
BVU-150/150P, VO-
6800/6800PS", BVW-
.|50/50P and BVV-5/
5PS°
(BVU-150/
150P and VO-
6800/6800PS)
or component
_ | (BVW-50/50P
and BVV-5/
5PS)
Sony professional
VTRs:
VO-8800/
8800P and EVV-9000/
9g000P
Panasonic AG-6400
2
Composite
VHS VTR
Panasonic AG-7400 S- |3
Y/C
VHS VTR® and JVC
BR-S405 S-VHS VTR
a) Set the audio input level on the VO-6800/6800PS to -60
dB.
b) When the BVV-5/5PS is used as a portable VTR, a VA-
5/5P VTR Composite/Component Adaptor is required.
c) Set the input selector switch on the AG-7400 to Y/C.
VTR selector settings on the CA-327/327P
Connected VTR
;
Sony broadcast and
professional VTRs:
BVU-150/150P and
VO-6800/6800PS®
Sony professional
VTRs: VO-8800/8800P
and EVV-9000/9000P
Panasonic AG-6400
VHS VTR
Panasonic AG-7400 S-
VHS VTR?
VTR
Video output
selector | signal
switch
setting
Composite
Composite
a) Set the audio input level on the VO-6800/6800PS to —60
dB.
,
b) Set the input selector switch on the AG-7400 to Y/C.
When using a number of cameras in the studio, it may
be necessary to use a CCU-M5/M5P/M7/M7P Camera
Control Unit to provide video and color sync between
cameras, and special effects and other devices to allow
switching, wipes and so forth.
In the studio it may also be convenient to use a DXF-
41/51 Viewfinder.
The figure in the next page shows an example studio
configuration.
For details, consult your Sony dealer.
¢ When using a camera control unit, put the camera
head into the EZ mode off state beforehand (see page
14), (Otherwise, it is impossible to access the
advanced menu.)
¢ With the DXC-D35/D35P/D35WSL/D35WSPL,
color matrix switching on the CCU-M5/M5SP is
invalid.
* When the DL in advanced menu page 2 is set to ON
(see page 64) and the OUTPUT/DL/DCC-+ switch is
set to DL, knee adjustment does not function on the
CCU-M7/M7P.
Chapter 2 Fitting and Connections
37
i ll
suonoeuuog
pue
Bunny
gz serdeyp
Advertisement
