Advertisement
suojjpeuuog
pue Sumy
¢ ieideuo
UHILEVTINITNN
MHI
Fitting a VTR
5 Perform the first three steps in
"Fitting a VTR".
6
Screw the connection plate
(supplied with the grip for the
DVCAM camcorder) which
straddles the connection
between the camera head and
the DSR-1/1P. Also, tighten
i
the two screws in the shoulder
Ze
<~
Connection
pad section. (See step 5 on
YF
eee 0
plate
page 26.)
Screw the grip for the
DVCAM camcorder.
Attaching a camcorder grip to the PVV-3/3P
1
Perform steps 2 to 4 in "Fitting
a VIR".
2
If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
For details, see "Adjusting the
viewfinder position" on page 32.
28
Chapter 2 Fitting and Connections
Advertisement
