Table of Contents
Advertisement
en
3.2.3 Inserting the battery
2
1
To insert the battery
1. Open the flap (1) on the bottom of the device.
2. Insert the battery into the battery housing (2), observing the indicated polarity,
and close the cover.
3. Finally close the flap.
3.2.4 Switching on the device
1.
Switch on the device by pressing the READ button (3).
The current prism temperature is displayed.
✓
If not in use, the device switches off automatically after 3 minutes.
3.2.5 Test measurement
▪
For commissioning and daily use, we recommend that an adjustment be carried
out with distilled water.
Instruction Manual DR201-95
Figure 5 – DR201-95 insert the battery
|
Version 3.1 © A.KRÜSS Optronic 2022
3
|
Page 13 of 30
Advertisement
Table of Contents
