TAKATA Mini Instructions Manual page 56

The TAKATA MINI has been authorized solely for
forwards-facing passenger seats, without airbags, that
have been approved by the airline for use with a child
car seat.
CAUTION!
In aircraft, the TAKATA MINI must be positioned on
the passenger seat against the direction of travel, using
a two-point safety belt (as described in these
instructions). Throughout the entire fl ight (from the
moment the cabin doors are closed until they are
opened again) ensure that the TAKATA MINI is
properly secured via the two-point belt. Otherwise,
other passengers may be injured by the seat, should it
come loose during turbulence or an emergency
landing.
WARNING!
The TAKATA MINI may only be attached in an
aircraft via a two-point seatbelt. Without exception, the
seat must be secured via a three-point seatbelt or the
TAKATA ISOFIX BASE when used in a vehicle.
Step 1 – Prepare the seat
[MINI_028] To install the TAKATA MINI in the
aircraft, the carry handle must be set upright in the
carry position.
Step 2 – Place on the passenger seat
[MINI_029] Place the TAKATA MINI in a backwards-
facing position on the passenger seat.
WARNING!
[Airbag Warning] NEVER fi t the TAKATA MINI in a
backwards-facing position on a passenger seat with
the airbag activated. There is a SERIOUS RISK OF
INJURY OR DEATH.
Step 3 – Check the seatʼs position in the aircraft
Ensure that the front section of the TAKATA MINI
de
en
fr
it
es
nl
51