INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before using this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
SAFETY PRECAUTIONS Read these instructions carefully before use and keep them for future reference. 1. DO NOT look directly into the worklight when it is switched on. 2. NEVER shine the light directly into anyone’s eyes including animals. 3. DO NOT use the worklight if the battery or the casing is damaged. 4.
OVERVIEW OPERATION 1. Press the button in the following sequence. • The worklight has four switching stages 25%, 50%,100%, Flashing, OFF 2. The worklight can be used while charging but has only 25% brightness in this function. This function can only be used for a short duration. 3.
BATTERY CHARGING & CARE 1. ALWAYS fully charge the battery before first use. 2. DO NOT leave the lamp on charge for more than 24 hours. 3. Recharge the lamp every six months when in storage. 4. Connect the charging cable to the charging jack on the worklight. Always use only the charging adaptor supplied.
Page 6
DECLARATION OF CONFORMITY-UK Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the LED1000R and is the answer not in the manual?
Questions and answers