INTRODUCTION Thank you for purchasing this CLARKE worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
SAFETY PRECAUTIONS 1. DO NOT shine the worklight into anyone’s eyes. 2. Ensure the worklight is fully charged before initial use. 3. DO NOT use the worklight during recharging. 4. DO NOT use if you suspect that the battery or the casing is damaged. 5.
FEATURES & OPERATION BATTERY CHARGING 1. Plug the docking station charging cable into a 230V power socket. • The charge indicator turns red if charging the battery is desirable. If the light is not being used for a long time keep it fully charged. Charging and discharging at intervals of max 3 months helps to maintain performance.
3. The LED light source cannot be replaced but has a life expectancy of approximately 30,000 hours. 4. DO NOT attempt to repair this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
COMPONENT PARTS Item Description Item Description Item Description Top Hook Lamp Panel Hook Cover Heat Sink Bottom Cap Top Cap Battery Sleeve Docking Bracket Circuit Board Lithium Battery Back Shell Moulded Shell Bracket Docking Circuit Angle Ratchet Lower Cap Front Shell Reflector Magnetic Base Switch...
Need help?
Do you have a question about the LED700SR and is the answer not in the manual?
Questions and answers