INTRODUCTION Thank you for purchasing this CLARKE portable worklight with carry handle and floor stand, suitable for indoor or outdoor use. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound.
ELECTRICAL CONNECTION WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved BS 1363 plug, or a suitably fused isolator switch. If the plug has to be changed because it is not suitable for your socket, or because of damage, it must be removed and a replacement fitted, following the wiring instructions shown below.
Page 5
8. Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 6
ERP TECHNICAL INFORMATION Model COB10C Part No 4003605 Model type L9601P Dimensions (L x W x H) 180 x 156 x 250 mm Weight 1.1 kg Operating Temperature C to + 50 Light Source COB LED Input power (LED Wattage consumption)
Need help?
Do you have a question about the COB10C and is the answer not in the manual?
Questions and answers