Safety and grid requirements
Country setup
Danger due to unauthorised error analyses and repair work.
This can result in serious injury and damage to property.
▶
NOTE!
Risk due to unauthorised access.
Incorrectly set parameters can negatively influence the public grid and/or the in-
verter feeding energy into the grid, and lead to a loss of conformity with the
standard.
▶
▶
NOTE!
Risk due to incorrectly set parameters.
Incorrectly set parameters can negatively influence the public grid and/or cause
faults and failures on the inverter, and lead to the loss of conformity with the
standard.
▶
▶
▶
The "Country Setup" menu area is intended exclusively for installers/service
technicians from authorised specialist companies. To request the access code re-
quired for this menu area, see chapter
The selected country setup for the respective country contains preset paramet-
ers according to the nationally applicable standards and requirements. Depend-
ing on local grid conditions and the specifications of the energy provider, adjust-
ments to the selected country setup may be necessary.
Requesting in-
The "Country Setup" menu area is intended exclusively for installers/service
verter codes in
technicians from authorised specialist companies. The inverter access code re-
Solar.SOS
quired for this menu area can be requested in the Fronius Solar.SOS portal.
Requesting inverter codes in Solar.SOS:
1
2
3
4
86
WARNING!
Fault analyses and repair work on the photovoltaic system may only be car-
ried out by installers/service technicians from authorised specialist compan-
ies in accordance with national standards and guidelines.
The parameters may only be adjusted by installers/service technicians from
authorised specialist companies.
Do not give the access code to third parties and/or unauthorised persons.
The parameters may only be adjusted by installers/service technicians from
authorised specialist companies.
The parameters may only be adjusted if the energy provider permits or re-
quires this.
Only adjust the parameters taking into account the nationally applicable
standards and/or directives and the specifications of the energy provider.
Go to
solar-sos.fronius.com
Log in with your Fronius account
On the top right, click on the drop-down menu
Select the menu item
Requesting inverter codes in
in a browser
Show inverter codes
Solar.SOS.