General Procedure - Siemens SIMATIC NET RUGGEDCOM RX1512 Equipment Manual

Rugged multi service platforms
Hide thumbs Also See for SIMATIC NET RUGGEDCOM RX1512:
Table of Contents

Advertisement

Installing the Device
2.1 General Procedure
Burn hazard – risk of personal injury
The surface of the device may be hot during operation, or as a result of the ambient
air temperature.
Wear appropriate personal protective equipment and use caution when working
with or around the device.
This product contains no user-serviceable parts. Attempted service by unauthorized
personnel shall render all warranties null and void.
Changes or modifications not expressly approved by Siemens Canada Ltd. could
invalidate specifications, test results, and agency approvals, and void the user's
authority to operate the equipment.
This product should be installed in a restricted access location where access can only
be gained by authorized personnel who have been informed of the restrictions and
any precautions that must be taken. Access must only be possible through the use
of a tool, lock and key, or other means of security, and controlled by the authority
responsible for the location.
2.1

General Procedure

The general procedure for installing the device is as follows:
Note
The user is responsible for the operating environment of the device, including
maintaining the integrity of all protective conductor connections and checking
equipment ratings. Make sure to review all operating and installation instructions
before commissioning or performing maintenance on the device.
1.
2.
3.
4.
8
Violation of EMC regulations
Damage to the device or other components
CAUTION
NOTICE
NOTICE
Review the relevant certification information for any regulatory requirements.
For more information, refer to "Approvals" (Page 31).
Review the "RUGGEDCOM RX1500 Series Modules Catalog" for special
installation or regulatory requirements related to the modules installed in
the device. In the case of cellular modem line modules, this includes antenna
installation and regulatory requirements.
Mount the device.
Connect the failsafe alarm relay.
RUGGEDCOM RX1512
Equipment Manual, 10/2023, C79000-G8976-1057-25

Advertisement

Table of Contents
loading

Table of Contents