Cleaning The Pump Filter - Hisense WFQP8014EVM User's Operation Manual

CLEANING THE PUMP FILTER

During cleaning, some water may be spilled. It is therefore recommended to place an absorbent
cloth on the floor.
Clean the pump filter and the in-wall water trap whenever the symbol
display unit.
The pump filter must be occasionally cleaned, especially after washing very fleecy, woolly, or
very old laundry.
1 Open the pump
filter cap using
a suitable tool (flat
screwdriver or a similar
tool).
2 Pull out the water
outlet funnel
before cleaning the
pump filter.
Rotate the pump filter
slowly in the counter-
clockwise direction.
Pull out and remove
the pump filter to allow
the water to slowly
drain.
3
Clean the pump
filter thoroughly
under running water.
4,5
Remove
all and any
objects and impurities
from the filter housing
and the pump
propeller.
Replace the pump
filter as shown in the
figure and fasten it
by rotating in the
clockwise direction.
For a good seal, the
filter gasket surface
should be clean.
(8) appears on the
47