Subaru Crosstrek 2020 Manual page 191

is in the "ACC" position.
While the ignition switch is in the "ACC" or
"ON" position, the basic screen will be
displayed.
! Outside temperature indicator
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
. The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following condi-
tions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
. The temperature unit cannot be
changed.
Instruments and controls/Multi-function display (color LCD)
! Climate control screen
The climate control status is displayed on
the multi-function display (color LCD).
Climate control screen
1) Set temperature indicator (left-hand side)
2) FULL AUTO indicator
3) AUTO indicator
4) Airflow mode indicator
5) Set temperature indicator (right-hand
side)*
1
6) Air inlet selection indicator
7) SYNC indicator*
1
8) Fan speed indicator
9) Air conditioner ON indicator
*1: Models with the SYNC function only
When operating the climate control sys-
tem, the basic screen switches to the
climate control screen. For details about
climate control operation, refer to "Climate
control panel" F4-2.
! Clock
The clock can be displayed in either 12-
hour display or 24-hour display. For details
about the setting, refer to "Clock" F3-63.
– CONTINUED –
3-51