USING THE THERMOSTAT
THERMOSTAT OVERVIEW
Before you begin using your thermostat, you should be familiar with its
features, display and the location/operation of the thermostat buttons.
THERMOSTAT BUTTONS AND SWITCHES
1.) Power
2.) Fan Selection
– 2-way options: Low, High (auto or continuous based on
Zoneline Auxiliary Mode #1 selection)
– 8 wire options: Auto Low, Auto High, Low and High (if
"C" is enabled in thermostat setting 6)
3.) Mode Selection
– 2-way options: Heat, Cool Fan
– 8 wire options: Heat, Cool, Fan, Auto (Autochangeover)
*Note: Auto must be enabled in setting 15 to be an
available option
4.) Lower Setpoint
5.) Raise Setpoint
14
THE DISPLAY
6.) Selected Setpoint
7.) 2-Way Communication Indicator
Solid Link = Connected
Blinking Link = Connection Issue
31-5000842 Rev. 0