The Oven Light - Sears Kenmore 665.95775 Use & Care Manual

REMOVING THE OVEN DOOR (contd.)
2, Hold oven door so that the top edge of each
hinge hanger is horizontal. Insert hinge hangers
into the front frame hinge slots.
3, Rotate top of door toward range. Slide hinge
hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully seat-
ed and engaged on the support pins.
4, Insert the door stop clip with the angular surface
at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.
5, Open the door completely and remove the door
removal pins. Save door removal pins for future
use.
6, Close the door.
Door stop Range
Door removal
pin hole
Door removal
pin hole
Angular sur-
stop
clip
THE OVEN LIGHT
The oven light will come on when you open the
oven door.
¢tee ' s e/ese ;
• Press the oven light pad.
¢ @
@Jr
1, Unplug range or disconnect power.
2, Remove the glass bulb cover in the back of the
oven by turning it
counterclockwise.
4,
Replace the light bulb cover by turning it clockwise.
3.
Remove the light bulb from its socket. Replace
the bulb with a 40-watt appliance bulb.
5. Plug in range or reconnect power.
NOTE: The oven light will not work during the
Self-Cleaning cycle.
4O