Sears Kenmore 665.95775 Use & Care Manual page 27

USING THE TIMED OVEN CONTROL (contd.)
To use this function, it is necessary to program two
of the three following keypads:
COOK TIME, STOP TIME, DELAY START TIME.
IMPORTANT: If you program DELAY START TIME
without programming COOK TIME or STOP TIME,
the oven will start at the programmed time, but will
NOT stop until you press CANCEL.
1. Select BAKE. Set the temperature (OPTIONAL).
2. Press COOK TIME.
Press the HR and/or MIN pads to select the
desired cook time.
3. Press DELAY START TIME.
Press the HR and/or MIN pads to select the
time of day to begin cooking.
4. Press START. The display will show the time of
day. The stop time will be calculated automati-
cally. The timed cook function will begin when
the time of day reaches the selected delay start
time.
1. Select BAKE. Set the temperature (OPTIONAL).
2. Press COOK TIME.
Press the HR and/or MIN pads to select the
desired cook time.
3. Press STOP TIME.
Press the HR and/or MIN pads to select the
time of day to stop the cook function.
4. Press START. The display will show the time
of day. The delay start time will be calculated
automatically. The timed cook function will
begin when the time of day reaches the delay
start time.
% Is o£=a s @IL£I dR£R[ ?II?IIi
1. Select BAKE. Set the temperature (OPTIONAL).
2. Press DELAY START TIME.
Press the HR and/or MIN pads to select the
desired time of day to begin cooking.
3. Press STOP TIME.
Press the HR and/or MIN pads to select the
time of day to stop the cook function.
4. Press START. The display will show the time
of day. The cook time will be calculated auto-
matically. The timed cook function will begin
when the time of day reaches the selected
delay start time.
Press the desired pad. The time will be displayed for 5 seconds.
{
ff you programmed:
Cook Time/Delay Start Time Cook Time OR Remaining Cook Time*
+
Cook Time/Stop Time Cook Time OR Remaining Cook Time*
Delay Start Time/Stop Time Cook Time OR Remaining Cook Time*
* After Delay Start Time has already been reached.
Delay Start Time Stop Time
Delay Start Time Stop Time
Delay Start Time Stop Time
NOTE: To recall the set temperature, press BAKE. The temperature will be displayed for 5 seconds.
= 'II _+Jff '* I ! "
B esa '@etl,e Ix'og a usel t
You can only change the two functions you previ-
ously set. The timed function which you did not
program cannot be changed by this procedure. It
will be recalculated automatically if either or both of
the previously programmed functions are changed.
1. Press the function pad (COOK TIME, DELAY
START TIME, STOP TIME) to be changed.
The setting will be displayed for 5 seconds.
2. While the setting is displayed, press the HR
and/or MIN pads to select the desired time.
3. Press START.
NOTE: To change the set oven temperature,
press either • or • pad(s) on the Temp pad.
continued on next page
27