Troubleshooting; Range Does Not Work; When Self-Cleaning Your Oven - Sears Kenmore 665.95775 Use & Care Manual

Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check
the lists below and on the next page before calling for assistance or service.
RANGE DOES NOT WORK
PROBLEM CAUSE/SOLUTION
Nothing works • The range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
• The control knob is not set correctly. Push in the control knobs before
turning them.
The oven does not work • You have not set the electronic control correctly. Refer to setting the
electronic oven control section. (See pp. 15-29.)
• You have set a delayed start time. Wait for the start time to be reached or
cancel and reset the control.
The surface cooking • You have blown a household fuse or tripped a circuit breaker.
zones will not work • You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
• The cooking element is burned out. Call a Sears Service Center for
replacement or repair.
Cannot boil on left front • Turn the SureSimmer knob to OFE
element/SureSimmerTM • Turn left front control knob to HI for a rapid boil.
feature
SureSimmer will not • Turn left front control knob on between the SureSimmer LO and 4 settings,
simmer along with turning the SureSimmer knob on.
SureSimmer element does • Turn left front control knob to "4", along with turning the SureSimmer
not get hot enough knob on.
WHEN SELF-CLEANING YOUR OVEN
PROBLEM CAUSE/SOLUTION
The Self-Cleaning cycle • You did not press START/ENTER.
will not work • You have set a delayed start time. Wait for the start time to be reached or
cancel and reset the control.
• The door is not closed all the way.
41