Connecting External Devices; Connecting The Headphones; Putting Batteries In The Remote Control - Grundig UMS 4700 SPCD Manual

14 14
CONNECTION/PREPARATION

Connecting external devices

Note:
Switch the hi-fi system off before you connect external devices.
1 Use standard audio cables to connect the audio outputs of the
external device to the
the hi-fi system.

Connecting the headphones

1 Insert the headphone plug (ø 3.5 mm) into the »
front side of the hi-fi.
– The loudspeakers of the hi-fi system are switched off.
Note:
Excessive sound pressure from the earphones or headphones can
cause hearing loss.

Putting batteries in the remote control

1 Open the battery compartment by pressing down on the catch
and then remove the lid.
2 Observe the polarity marked on the base of the battery
compartment when inserting the batteries (micro batteries,
2 x 1.5 V, R 6/UM 4/AAA).
Notes:
Do not expose the batteries to extreme heat, caused for example
by direct sunlight, heaters or fire.
Remove the batteries when they are flat or when you know that
the hi-fi system will not be used for a long period of time. The
manufacturer accepts no liability for damage caused by leaking
batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
»AUX IN 1« or »AUX IN
----------------------
2« sockets on
U
« socket on the