Connection And Preparation; Connecting The Antenna; Connecting The Loudspeakers; Connecting External Devices - Grundig UMS 4950 iP User Manual

CONNECTION AND PREPARATION

Connecting the antenna

1 Plug the auxiliary antenna supplied or the roof
antenna cable into the »FM« socket.
Notes:
If no roof antenna is available, use the aux-
7
iliary antenna supplied. When suitably po-
sitioned, this antenna provides reasonably
good reception of local FM (VHF) channels.
Do not shorten the auxiliary antenna.

Connecting the loudspeakers

1 Insert the loudspeaker cables into the sockets
»SPEAKER L« and

Connecting external devices

Note:
Switch the hi-fi system off before you connect
7
external devices.
1
Use standard audio cables to connect the
audio outputs of the external device to the
»AUX IN L« and
sockets
back of the hi-fi system.
»SPEAKER R«.
»AUX IN R« on the

Connecting a USB memory stick

The hi-fi system supports most USB memory sticks.
Note:
The hi-fi system must be switched off while
7
the USB connection is being made. If it is not
switched off, data can be lost.
1 Switch off the hi-fi system by pressing »
2
Connect the USB interface of the MP3 player
to the »USB« socket on the hi-fi system (under
the front flap), using a standard USB cable;
or
insert the USB plug of the USB memory stick
in the »USB« socket on the hi-fi system (under
the front flap).
Notes:
To remove the MP3 player or the USB
7
memory stick, switch off the hi-fi system and
pull out the cable for the data medium.
The USB socket on the hi-fi system does not
7
support a connection for a USB extension
cable and is not designed for directly
connecting to a computer.
---------------------------------------
8
«.
ENGLISH
9