Inserting A Memory Card; Removing The Memory Card; Connecting External Devices; Connecting The Headphones - Grundig Ovation 3 Instruction Manual

CONNECTION AND PREPARATION

Inserting a memory card

The hi-fi system supports SD/SDHC and MMC
memory cards.
Note:
The hi-fi system must be switched off while
7
the memory card is being inserted. If it is
not switched off, data can be lost.
1
Switch off the hi-fi system by pressing »
2 Insert the card carefully into the »SD« card
slot (on the left side) with gold contacts first
and facing to the backside, until it latches into
place.
Note:
Do not use excessive force when inserting
7
the memory card. Only apply slight
pressure.
The memory cards are resistant to dirt and
7
moisture, but may only be inserted into the
hi-fi system in a dry and clean condition.
Never remove memory cards during
7
operation. This can damage the memory
card. This type of damage will invalidate
your warranty.

Removing the memory card

Note:
The hi-fi system must be switched off while
7
the memory card is being removed. If it is
not switched off, data can be lost.
1 Switch off the hi-fi system by pressing »
2
Remove the memory card from the card slot
by pressing the card inwards slightly until the
latch is released. Then pull out the card.

Connecting external devices

Note:
Switch the hi-fi system off before you
7
connect external devices.
1
Use a standard audio cable to connect the
audio output of the external device to the
socket »AUX
8
«.
system.

Connecting the headphones

1
Insert the headphone plug (ø 3.5 mm) into
the » U
system.
– The loudspeakers of the hi-fi system are
switched off.
Note:
Excessive sound pressure from the
7
earphones or headphones can cause
hearing loss.
«.
8
---------------------------------------
IN« on the back of the hi-fi
« socket on the left side of the hi-fi
11
ENGLISH