Table of Contents
Advertisement
Playing a record
How to use with Bluetooth connection
• To connect for the first time, pair the product and your device via
Bluetooth wireless technology.
• Read the user manual for the Bluetooth receiver device.
• Note that Audio-Technica cannot guarantee the operation of displays,
such as the battery level display, or applications via Bluetooth
devices.
1. Turn on the Bluetooth receiver device.
• Indicator LED turns blue when the product and Bluetooth receiver device
are connected correctly.
• When the indicator LED lights in red, press the wireless function button to
connect Bluetooth communication.
2. Refer to "Playing a record" on p. 12 to play a record.
When Bluetooth is connected, and you keep the wired
•
connection (amplifier, speaker, etc.) turned on, the sound will be
heard from both the wireless and wired devices. Turn on only
the device you want to use for playback.
Care
Turntable body
• When the turntable body is dirty or dusty, first disconnect the
AC adapter's cord, and then wipe off the dirt and dust with a soft,
dry cloth.
• Do not use benzenes, thinners, etc.
• When storing the product for a long time, disconnect the
AC adapter's cord from the outlet and wrap the equipment in plastic;
do not allow it to become damp.
Stylus tip
• If dirt and grime are stuck to the stylus tip, clean it before each use.
• We recommend using a stylus cleaner (sold separately) if the stylus
tip is considerably dirty. Clean the stylus tip by moving the brush
from the rear to the front of the stylus tip.
Replacing the stylus
Removing the stylus
• In addition to the deterioration of sound quality, records may also be
damaged as the cartridge's stylus tip wears down.
• As a rule of thumb, replace the stylus after 300 hours of use.
• Be sure to disconnect the product's AC adapter from the outlet.
1. Release the headshell from the tonearm.
• Fix the tonearm with the clamp and then remove the headshell gently.
2. After removing the cartridge's protector, remove the stylus
by pulling in the direction of the arrow without touching the
cantilever, stylus tip, and magnets.
Installing a new replacement stylus
1. Mount the new replacement stylus to the cartridge.
2. Mount the headshell onto the tonearm.
14
Pull
Align the position of the inner
protrusion.
Advertisement
Table of Contents
