Table of Contents
Advertisement
Care
Turntable body
When the turntable body is dirty or dusty, first disconnect the
•
AC adapter, and then wipe off the dirt and dust with a soft,
dry cloth.
Do not use benzenes, thinners, etc.
•
When storing the product for a long time, disconnect the AC
•
adapter from the outlet and wrap the product in plastic; do
not allow it to become damp.
Stylus tip
If dirt and grime are stuck to the stylus tip, clean it with a
•
commercially sold brush.
We recommend using a stylus cleaner (sold separately) if the
•
stylus tip is considerably dirty. Clean the stylus tip by moving
the brush from the rear to the front of the stylus tip.
Replacing the stylus
Removing the stylus
In addition to the deterioration of sound quality, records may
•
also be damaged as the cartridge's stylus tip wears down.
As a rule of thumb, replace the stylus after 400 hours of use.
•
Be sure to disconnect the product's AC adapter from the
•
outlet.
When replacing the stylus, hold the headshell and the
•
cartridge body tightly.
1. Rotate the front of the stylus in a forward and down
motion.
Installing a new replacement stylus
1. Mount the new replacement stylus to the cartridge.
2. Lift the stylus up until you hear a click.
3. Make sure there is no gap between the headshell and the
cartridge.
10
Engage in body first
Advertisement
Table of Contents
