Table of Contents
Advertisement
Preparation for use
Connecting via Bluetooth wireless technology
The product supports Bluetooth wireless connection. It can be
connected with Bluetooth-compatible headphones, active speakers and
wireless stereo speakers (hereinafter referred to as Bluetooth receiver
devices).
About pairing
When connecting a new Bluetooth receiver device, you need to pair it
with the product. Once the Bluetooth receiver device and the product
are paired, you do not need to pair them again.
However, in the following cases you will need to pair again even if the
Bluetooth receiver device was paired once:
• If the product is deleted from the Bluetooth receiver device's
connection history.
• If the product is sent out for repair.
• If 9 or more devices are paired.
(The product can save the pairing information of up to 8 devices.
When you pair with a new device after pairing with 8 devices, pairing
information for the device with the oldest connection date will be
overwritten by the information for the new device.)
Pairing a Bluetooth device
• Read the user manual for the Bluetooth receiver device.
• Place the device within 1 m (3.3') of the product to perform pairing
correctly.
1. Set your Bluetooth headphones, speakers, etc. to pairing mode.
O N
O N
2. Make sure the AC adapter is connected to an outlet, and then
press and hold the wireless function button (about 2 seconds).
• The indicator LED will flash in red and blue alternately.
2 SEC
Blue
Red
3. When pairing is complete, the indicator LED lights in blue.
The product stays in the pairing mode for 30 seconds. If pairing
•
is not properly completed, follow the above steps again from the
beginning.
About indicator LED display
The indicator LED indicates the product's status as explained below.
Status
Searching for
Pairing
device
Waiting to be
connected
Connection
Connecting
Disconnecting
9
Indicator LED display pattern
Red
Blue
Blue
Flashing
Lit
Advertisement
Table of Contents
