User manual / Bedienungsanleitung
5.2 Alignment and adjustment of the cartridge
Use the adjustment template, included in the scope of the delivery for the final tonearm and cartridge
adjustment.
Place it directly on the turntable (without record) and align it with the arrow pointing toward the
tonearm pivot point (Pic. 12).
Pic. 12: Placing the adjustment template
Pic. 13: Correct alignment of the cartridge
Made in Germany
Take the tonearm out of the rest position and align it in
the area of the cross lines.
Lower the tonearm and check the alignment.
The cartridge body must be aligned in the template grid
so that the needle tip is in the cross lines.
Also, the side and front edges of the housing have to be
parallel to the grid lines.
To correct the adjustment, loosen the screws of the
cartridge to move the cartridge in the headshell.
Re-check the setting again after you have tightened the
screws.
Page / Seite 13