Operating With Additional Base Unit - Samsung SPR-5200 Service Manual

2-37 Operating with Additional Base Unit

The SP-R5200 handsets may be used with up to four base units. To use the handset with more than one base
unit, you must register the handset at each base unit. Refer to ÔRegistering New Handset with BaseÕ on page
2-33.
2-37-1 To Find the Base Unit Automatically
¥ With the ÔAuto FindÕ feature set to ÔONÕ, if you are moving around, and lose contact with the base unit, the
handset will automatically find the first available base unit.
¥ The feature is preset to ÔOFFÕ.
1. Press or button repeatedly until
2. Press button.
OK
Result: The display shows the current setting; On or Off.
3. Press or button to choose ÔOnÕ or ÔOFFÕ.
4. Press button to confirm.
OK
2-37-2 To Select the Base Unit Manually
You can select a base unit through which you want your handset to operate.
1. Press or button repeatedly until
2. Press button.
OK
Result: The display shows the currently selected base number.
3. Press or button repeatedly to choose the desired base unit.
4. Press button to confirm.
OK
2-31
appears.
appears in the display.
Operations & Installation