Samsung SPR-5200 Service Manual page 100

HOW TO INSTALL JIG PROGRAM IN YOUR PC
1.. copy 5200jig.zip to root directory from A drive.
2. Extract 5200jig.zip
Then 6 subdirectory is created, and some files are created in 5200jig directory.
execution file : 5200jig.exe
HOW TO USE JIG PROGRAM
If you execute 5200jig.exe, you can see the below display.
TESTSET SELECTION
At the beginning, Com port is setted to COM 1.
You should choose a set which is tested using 0/1 or up/down key.
After you select a testset, press Enter.
In next display, you should select s/w version in your testset.
SELECT S/W VERSION
After you typed the s/w version, press Enter.
Next display is to national option.
SELECT NATION
You should choose the nation which you want to test. and then press enter key.
Now, you are ready to test, and you can see the Main Test Screen.
Test Jig Usage
EXPLANATION OF JIG PROGRAM
--- SET SELECTION ---
Initial Port is COM 1
Select a Board to Test:
0) Basest
1) Hanset
--- SELECT VERSION ---
0 : base(hand) version 4.8(5.4)
1 : base(hand) version 5.0(7.0)
Press the number(0/1) and then Press the Enter Key.
--- NATION SELECTION ---
0)U.K.(Emergency)
1)U.K.(No Emergency)
2)FRANCE
3)GERMANY
4)SPAIN
5)ITALY
6)NETHERLANDS
7)RUSSIA
8)AUSTRIA
9)GREECE
Select the Number of nation?
And then touch ENTER key.
=> 0
=> 0
9-4