Changing Pin (Personal Identification Number); Registered Recall - Samsung SPR-5200 Service Manual

Hide thumbs Also See for SPR-5200:

Table of Contents

2-29 Changing PIN (Personal Identification Number)

The PIN is required when you bar calls or register handsets to a base unit. The PIN is preset to Ô0000Õ at factory.

You can change the PIN code.

1. Press

button repeatedly until

2. Press

button.

3. Enter the currently used PIN code.

Result: The LCD window dose not display the PIN code you entered in order to maintain secrecy.

Note: If you enter a wrong PIN code, your phone returns to Standby mode.

4. Enter the new PIN code you want.

Note: It must be 4 digits. If you enter a wrong number, you can correct the number by using the C/R button.

5. Press

button.

6. Enter the new PIN code again to confirm the number.

Note: If you change the PIN code and then forget it, you will have to contact service center.

The C/R button is used in conjunction with special services such as ÔCall waitingÕ which may be offered by

your telephone company. You can place a new call directly after a call or transfer a call to another extension

under PABX, using this feature.

To send a flash, simply press C/R button while the line is engaged.

Result: The display shows

Operations & Installation

appears in the display.

2-24

Table of Contents