COOLING SYSTEM
5.2. RADIATOR
5.2.1.
REMOVING THE RADIATOR
•
Drain the coolant completely, see 2.5 (CHANGING
THE COOLANT).
•
Remove the front inner shield, see 7.1.6 (REMOVING
THE FRONT INNER SHIELD).
•
Remove the headlight, see 7.2.7 (REMOVING THE
HEADLIGHT).
•
Disconnect power connector (1).
•
Disconnect power connector (2).
IMPORTANT Get screwdriver-type pipe clamps, to replace
the original ones (special type without screw).
•
Cut the head of the pipe clamps (3) and (4).
IMPORTANT Upon reassembly, replace the clamps (3) and
(4) with the new ones.
•
Withdraw the two hoses (5) and (6) from the radiator
couplings.
•
Cut the head of the pipe clamp (7).
IMPORTANT Upon reassembly, replace the clamp (7) with
the new one.
•
Withdraw the breather pipe (8) from the radiator cou-
pling.
•
Working from both sides, loosen and remove the
screws (9) from radiator mounting bracket.
•
Loosen and remove centre screw (10) from radiator
mounting bracket.
•
To remove radiator, slide it out from below.
WARNING
Proceed with care. Do not damage the radiator
fins.
•
Remove radiator electric fan
5 - 4
WWW.PlanDeGraissage.ORG
LEONARDO 250 - 300