CYCLE PARTS
7.3.4.
REMOVING THE FRONT BRAKE MASTER
CYLINDER
•
Remove rear handlebar cover, see 7.1.14 (REMOVING
THE REAR HANDLEBAR COVER).
•
Unscrew the two screws (1).
•
Remove brace (2).
•
Remove front brake master cylinder, but do not dis-
connect it from brake line.
If necessary, remove the whole rear brake master cylinder.
•
Drain all fluid off brake system, see 2.6 (BRAKES).
•
Unscrew and remove screw (3). Keep safety washers.
•
Remove front brake master cylinder.
7 - 42
WWW.PlanDeGraissage.ORG
LEONARDO 250 - 300