Advertisement
Quick User Guide
Removing the robot from the pool
Grab hook - Pull robot to waterline, then grab it with your hand to pull it out of the water.
1
*
* Standard pole, not included
ClickUp
TM
After the cleaning cycle, shake the Clicker inside the water for over 3 seconds and the robot will
climb its nearest wall. The robot needs to finish its cycle before it can be called up with the Clicker.
In regular mode, the feature will be available for 6 days after the cleaning cycle ends.
Please note: When in Eco Mode, you can use the Clicker between cycles and at the end of the
third cycle, however using the Clicker will cancel the Eco Mode.
1
3
End of Cycle Pickup
In the last few minutes of its cleaning cycle, the robot will climb each wall and wait 20 seconds
to be taken out. If you started the cycle with the app, you will get a push notification on your
phone to let you know the robot is waiting. If it isn't picked up, it will wait on the floor near a
wall. You can then use the Clicker or hook to take it out.
Cleaning the Filter Basket
To prevent debris from hardening on the filter, we highly recommend quick-rinsing the filter
immediately after removing the robot from the pool.
1
2
2
2
|
3
3
3
EN - LIBERTY Quick User Guide | 3
4
4
Advertisement
