Safety Instructions - EcoFlow RIVER 2 Manual

Safety Instructions

Safety Instructions
WARNING WARNING
When using this product, the following precautions should be adhered to:
Usage>
1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. When using the product, please strictly follow the operating environment temperature specified in this user manual.
If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product
performance may be severely reduced, or the product may cease to work.
3. If this product accidentally catches fire, we recommend that you use the fire extinguishers in the following order:
water or water mist, sand, fire blanket, dry powder, and carbon dioxide fire extinguishers.
4. Do not allow this product to come into contact with any liquid. Do not use this product in the rain or high humidity.
5. It is recommended that you use moisture barrier bags in humid environments (for example, places by the sea or
waterways) to prevent the product from ge-ing wet.
6. If water is found inside the product, or the product is accidentally dropped into water, it must not be used or turned
on again. Please place it in a safe open area, and stay away from it until it is completely dry. Please do not approach
the product before it is dry. Please take anti-electric shock measures before touching the product. The dried
product should not be used or discarded at will. Please properly dispose of it after contacting Customer Service.
7. Use a dry cloth to clean dirt from the product ports.
8. Do not use this product in an environment with strong static electricity or strong magnetic fields.
9. Do not stack any heavy objects on the product.
10. Store the product in a dry and ventilated place.
11. Keep this product out of reach of children and pets.
12. Do not place the ba-ery in a low air pressure environment, as this may cause flammable liquids to leak or even an
explosion.
13. Do not disassemble or puncture this product in any way with sharp objects.
14. Do not forcibly block the fan during use.
15. Do not touch the product port with wires or other metal objects to avoid short circuits or other risks.
16. When using or transporting this product, please avoid impact, falls and violent vibrations. In case of a severe impact,
stop using this product immediately and turn o' the power.
17. Do not use uno'icial components or accessories as this will void the warranty. Consult o'icial EcoFlow channels if
you need to replace any component or accessory.
18. This product is not recommended for powering medical emergency equipment related to personal safety, including
but not limited to medical grade ventilators (hospital CPAP: Continuous Positive Airway Pressure) or artificial lungs
(ECMO: Extracorporeal Membrane Oxygenation). The product can be used to power a home ventilator (home CPAP)
that does not have to be continuously monitored by professionals. Please follow your doctor's instructions and
consult with the manufacturer for restrictions on the use of the equipment. If it is used for general medical
equipment, please be sure to monitor the power status to ensure that the power does not run out.
19. When in use, power supply products will inevitably generate electromagnetic fields, which are likely to a'ect the
normal operation of medical implants or personal medical equipment such as pacemakers, cochlear implants,
hearing aids, defibrillators etc. If these types of medical equipment are being used, please contact the manufacturer
to inquire about any restrictions on the use of such equipment. These measures are fundamental to ensure a safe
distance between medical implants (for example, pacemakers, cochlear implants, hearing aids, defibrillators, etc.)
and this product while in use.
20. When the power supply is connected in the normal mode to a refrigerator, the power supply may be automatically
shut down due to the power fluctuation property of the refrigerator. If the refrigerator stores medicines, vaccines or
other high-value items, it is highly recommended that you set the AC output to "Never Turn O'" through the EcoFlow
app when connecting the power supply product to ensure a continuous power supply. Users should pay a-ention to
the power consumption of the power supply.
21. Do not put fingers or hands into the product.
22. To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the
power pack.
23. Do not operate the power pack with a damaged cord, plug or output cable.
24. To reduce the risk of electric shock, unplug the power pack from the outlet before a-empting any instructed
service.
25. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
26. Do not use a ba-ery pack or appliance that is damaged or modified. Damaged or modified ba-eries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.