ProRacing TS2 PRO User Manual page 8

4 Assembly of turbo petrol engines
2
To disconnect the connectors from the sensors it is necessary to press not too hard in order to raise the
•
release clip or move the safety catch.
We normally have 90% of the photos in the catalog of all engines, check your inbox
registration, at the time of purchase we send the speci c photos in our possession.
3
It intercepts the suction pressure sensor located on the suction ange, releases the connectors and
•
connect as shown in the gure by interposing the wiring between the car sensor and the engine
wiring.
Make sure the connector's safety clip clicks back into place:
•
you can hear it by CLICK.
8