ProRacing TS2 PRO User Manual page 6

3 Installation
Step 2 of 6 - Remove the engine cover
Normally after purchase, we send speci c photos for yours by email
engine for easy editing, then check your mail.
In the following images there will be sample photos. Your car may di er,
However, the installation is very similar.
Normally your engine cover is interlocked with rubber clips (A) or
with one or more screws (B).
A
•
Remove the engine cover and set it aside, simply lift upwards by doing
more strength in one side at a time.
B
In some cases, in order to remove the plastic cover of the motor, it is necessary to unscrew one or
•
more screws.
•
If you do not have any engine coverage go directly to Stage 3 for Diesel Engines.
6