ProRacing TS2 PRO User Manual page 15

7 Troubleshooting
Error description
The control light
engine or other warning
lights in the dashboard
remain on.
Dashboard light
for the control of
engine continuously
lit after a certain
walking time.
How to intervene
• After installation, warning lights on the dashboard came on
giving error?
This does not always result in a real problem given that
if you have disconnected any connectors in the engine when it was
present current, this may have generated an error that does not
a ect on the correct functioning of the motor, but it could weaken
performance for recovery system.
There is no need to worry, just turn o the light or
the reports.
•
Normally the lights turn o by themselves after a cycle of 5 restarts
or after about 100 / 200km.
It is possible to connect the connectors in reverse by reversing the
•
polarity, this surely generates an error in the dashboard.
Normally we always send photographic material afterwards
the purchase by e-mail that shows how the insertion takes place
corrected of some types of connectors that mistakenly can
be entered incorrectly.
•
An adjustment that is too high or higher than that allowed by the
vehicle manufacturer may result in protection or losses
sudden power. It is su cient to lower the setting
via app or external keypad. This way they will be avoided
other reports.
If the warning light on the dashboard does not go out by itself it
•
means that that particular car model needs a reset via
OBD2 diagnosis socket.
Our technicians have a speci c OBD2 reset for sale
for a do-it-yourself removal via Smartphone-APP.
Or have your auto mechanic / electrician reset the lights.
15