ProRacing TS2 PRO User Manual page 14

7 Troubleshooting
If you've been experiencing dash warning lights issues or don't feel enough power boost here
nd the rst support. If you do not nd the information you are looking for, you can contact assistance
customers.
Error description
No increase of
power or porformance
they are not enough
perceptible
The diesel engine under load
in acceleration ago
perceive a noise
of injection stronger than
normal?
Jerks in acceleration.
Serrations in
acceleration in the high mids
regimes or trend
not uid at all
adjustments (eco-sport-race).
How to intervene
• On the chapter "custom adjustment" you can nd
info on how to best set up to further increase
the performances.
•
Normally it is su cient to move selector S1 by one position
clockwise.
•
Example: if S1 is in position 8, move it to position 9
as indicated in the "customized adjustment" chapter.
If it is a noticeable increase in injection noise
•
under load rst take a test drive, you might hear
in acceleration a ticking.
This is absolutely normal as you are increasing
•
the injection pressures the noise will be more perceptible and present.
To make this noise less emphasized, lower the
•
race in sport adjustment or lowering the boost.
• If you have jerks at the start or acceleration probably
the automatic transmission is adapting, so we recommend
proceed with the automatic adaptation.
• During the adaptation phase, the accelerator accompanies the throttle.
• It is possible to eliminate tears by lowering the adjustment.
If in acceleration you feel jaggedness or lack of power
•
you have to act on the S2 selector, moving it to one more setting
high.
•
Usually setting the S2 selector in position 4 causes the problem
is obviated.
•
If setting position 4 has not solved it, move the selector
S2 in position 5 - 6 or at most 7.
•
Go to the custom adjustment chapter.
14